ROOF RENEWAL SYSTEM
SEALS YOUR LEAKS WHEN YOU NEED PROTECTION MOST!
For renewing sloped
and dead level paper, gravel and metal roofs. For commercial,
industrial and institutional use, solve the most difficult problems with
GOES INTO PRODUCING A SUPERIOR ROOF COATING?
This new technology
blended with the finest asphalts
gives WET-JETŪ its toughness...the toughness to withstand sub-freezing
temperatures and still retain amazing flexibility. It expands and
contracts with the roof
mat even through sudden temperature drops.
The fiberglass gives
WET-JET the extra strength to bridge cracks and splits...In hot weather it
makes sure WET-JET won't sag or run on a metal roof - even at 400° F. Coated on smooth metal and inclined at an
angle of 60°,
it won't run or sag.
Our ADDITIVES -- X-5
Oil -- gives WET-JET the super penetration it needs to restore life to old
sloped gravel and paper built-up
roofs. Pinecel thrusts back the deadly oxidizing rays of the sun
that break a roof down fast, forcing expensive, premature replacement.
blends give WET-JET super penetration...make it easy to apply. With
brush, roller or SEAMLESS
SPRAY Equipment, WET-JET goes down fast...the complete renewal takes
just one coat...makes renewing roofs a simple job, not a complicated
PACE's Total Roof
Renewal System applying a WET-JET roof coating uses the existing roof as a
base and will restore, seal, recondition and waterproof old worn out
roofs, saving unnecessary tear off and replacement expense - all in one
easy, one coat process. With PACE's WET-JET Roof Renewal System,
over 90% of a building owner's money goes toward the materials which keep
the roof watertight. Expensive contractor labor and overhead costs
are bypassed. Thousands of dollars are saved on even the smaller
WET-JET has an
unprecedented ability to expand and contract, and withstand tremendous
temperature changes. Because WET-JET will give and take with the
movement of the roof, it will not peel, crack or become brittle even under
sub-freezing temperatures...unsurpassed for complete overall roof renewal
With WET-JET, the
original Wet Surface Coating, emergency repairs can start immediately.
WET-JET sticks to the wet roof, stops the leak and keeps it stopped.
There's no need to wait for the sun to shine. WET-JET keeps
production going and the business running; there's no lost production of
business due to a damaging roof leak. Then when the storm abates,
the complete roof renewal can be accomplished.
Covers at rate of 1
1/2 gallons per 100 sq. ft. on smooth metal; 2 gallons per 100 sq. ft. on
corrugated metal; 3 gallons per 100 sq. ft. on sloped paper,
mineral/composition; 6-8 gallons per 100 sq. ft. on sloped and dead level
gravel. Available in 55 gal. and 205 liter barrels and 5 gal. and 20